Tanks & Tankers
Technical Properties
BTI | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Light Green | |
Composition | Mixture of Hydrocarbons and surfactants-emulsifiers | |
Physical Parameters | ||
Boiling Point | 140° - 350°C | |
Density (water=1) | 0.81 | |
Soluble in water | irrelevant, emulsifies water (even salty water) | |
Flammable Point | 70° C | |
Auto-ignition Temperature | > 220° C | |
pH | 8.0 - 9.0 | |
Application and Dosage | ||
For cleaning tanks, pipes, etc. Dosage between 1 and 5% |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
BFO | DATE | 28 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Green | |
Composition | Mixture of hydrocarbons, surfactants and emulsifiers | |
Physical Parameters | ||
Boiling Point | 140° - 350°C | |
Density (water=1) | 0.80 - 0.85 | |
Soluble in water | irrelevant, emulsifies in water | |
Flammable Point | 70° C | |
Auto-ignition Temperature | > 220° C | |
pH | 6.3 - 6.5 | |
Application and Dosage | ||
Stabilizes the FUEL-OIL preventing the separation of water, causing a stable
micro-emulsion and avoiding cut offs of the combustion. Improves the atomization of
carburant in the injectors. Eliminates residual lumps in fuel oil tanks, reducing the
possibility of the plugging of filters and injectors. Dosage: • Shock Treatment to eliminate lumps1% vol. • Preventive Treatment for tanks that will be left standing up in the future1% vol. • Maintenance Treatment for the improvement of combustion0.1% vol. |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
BVM | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Green | |
Composition | Mixture of hydrocarbons, surfactants, emulsifiers and algaecides | |
Physical Parameters | ||
Boiling Point | 140° - 350° C | |
Density (water=1) | 0.81 | |
Soluble in water | Irrelevant, emulsifies water | |
Flammable Point | 70° C | |
Auto-ignition Temperature | > 220° C | |
pH | 8.0 - 9.0 | |
Application and Dosage | ||
Stabilizes the GAS-OIL preventing the separation of water and causing a stable
micro-emulsion and avoiding cut offs of the combustion. Also it prevents the growth of algae
and the formation of mucilage in tanks. These materials are commonly called "gas-oil snot" Dosage: • Shock Treatment to eliminate algae and mucilage1% vol. • Preventive Treatment for tanks that will be left standing still in the future1% vol. • Maintenance Treatment for the improvement of combustion0.1% vol. |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |