Flow Stations & Refineries
Test Results SWO
INTERTEK COMPARATIVE TEST
SWO
Product: Crude Oil
ANALYSIS | CRUDE OIL WITHOUT ADDITIVE |
CRUDE OIL WITH 0.5% SWO, ADDITIVE |
RESULTS | |
Water | 0.40% v/v | 0.15% v/v | -0.25% v/v | -62.50% |
Sample | BS-14140/07 | BS-14140/08 |
Sample Details:
Sample of Petroleum Crude Oil, which has been additiviated with 0.5% of SWO.
The Product: SWO, was applied, undiluted, at a ratio of 0.5% vol. on the Petroleum Crude Oil and stirred to achieve homogeneity of the mixture.
The sample was allowed to settle for 24 hours.
After 24 hours, the decanted water was separated from the Petroleum Crude Oil and water content measured.
The diference on Water Content according ASTM D-95/13€1 method on sample with and without SWO additive is significant.
Date: April 29, 2014
An analysis of a crude oil, performed by an independent laboratory, Intertek http://www.intertek.com/, which was compared to the same crude oil that was added with the demulsifier SWO additive.
The dosage was 0.5% of SWO additive.
Comments
A sample of crude oil that was added the demulsifier SWO additive.
This product was applied in a proportion of 0.5% of the volume of the crude oil and was properly mixed until a homogeneous mixture was obtained. The sample was left to rest for 24 hours.
After 24 hours, the decanted water was separated from the crude oil and was measured.
It was observed that there had been a reduction in water content of 62.5% compared to the initial amount.
OilFlux™ has engaged the world renowned company, Intertek, to test, inspect and certify the efficacy of the OilFlux™ specialty chemical products for the oil and gas industry.
To view the Intertek products testing certificates for the OilFlux™ please Sign In or if you are not a member, Sign Up