Extraction & Pipeline Transportation
Technical Properties
W10 | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Light Bluish Green | |
Composition | Mixture of Hydrocarbons and surfactants | |
Physical Parameters | ||
Boiling Point | 100° - 120°C | |
Density (water=1) | 0.84 | |
Soluble in water | Insoluble | |
Flammable Point | 70° C | |
Auto-ignition Temperature | > 200° C | |
pH | 7.0 - 7.5 | |
Application and Dosage | ||
For fluidification of the mass (crude oil) in wells or pipelines
Recommended dosage between 0.2 and 0.5% |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
W20 | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Green | |
Composition | Mixture of Hydrocarbons and surfactants | |
Physical Parameters | ||
Boiling Point | 120° - 130°C | |
Density (water=1) | 0.84 | |
Soluble in water | Insoluble | |
Flammable Point | 60° C | |
Auto-ignition Temperature | > 200° C | |
pH | 6.5 | |
Application and Dosage | ||
For fluidification of the mass (crude oil) with high levels of viscosity
in wells or in pipelines Recommended dosage between 0.2 and 0.5% |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
W30 | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Green | |
Composition | Mixture of Hydrocarbons and surfactants | |
Physical Parameters | ||
Boiling Point | 110° - 150°C | |
Density (water=1) | Between 0.8 and 0.9 | |
Soluble in water | Insoluble | |
Flammable Point | as per test once it has been formulated | |
Auto-ignition Temperature | > 200° C | |
pH | Estimated between 6 and 8 | |
Application and Dosage | ||
This fluidifier will be formulated once the crude oil has been studied It will be formulated to solve specific problems of crude oils that are very difficult to extract The dosage will also depend on the results of the study done in the laboratory |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
WAS | DATE | 5 Dec 2014 |
VERSION | 1a |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Light Bluish Green | |
Composition | Mixture of Hydrocarbons and surfactants | |
Physical Parameters | ||
Boiling Point | 100° - 120°C | |
Density (water=1) | 0.83 | |
Soluble in water | Insoluble | |
Flammable Point | 50° C | |
Auto-ignition Temperature | > 200° C | |
pH | 6.8 - 7.5 | |
Application and Dosage | ||
For fluidification of the mass (crude oil) with a high amount of asphaltenes
in wells or in pipelines Recommended dosage between 0.2 - 0.5% |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |
WPF | DATE | 4 Mar 2014 |
VERSION | 1st |
Product Description | ||
Aspect | Transparent Liquid | |
Colour | Reddish Violet | |
Composition | Mixture of Hydrocarbons, aromatic dissolvents and surfactants | |
Physical Parameters | ||
Boiling Point | 125° - 200°C | |
Density (water=1) | 0.85 | |
Soluble in water | Irrelevant | |
Flammable Point | 65° C | |
Auto-ignition Temperature | > 220° C | |
pH | 6.8 - 7.2 | |
Application and Dosage | ||
For fluidification of the mass (crude oil) when paraffin is present in wells
or pipelines and paraffin separator
Dosage between 0.1% and 0.5% |
||
Handling, Storage and Stability | ||
Avoid electrostatic charges Do NOT get in touch with hot surfaces Use protective gloves Use protective glasses Do NOT eat, drink or smoke while handling it |